Lifting Beams & Frames

Home|Lifting Beams & Frames
26 02, 2017

Bespoke Lifting Beam(s) – SWL 5t

2017-02-26T20:50:43+00:00February 26th, 2017|Lifting Beams & Frames|

Bespoke lifting beam(s) - 2off - Designed & manufactured on behalf of a manufacturer/supplier of packaged pump equipment for lifting of bespoke pump/motor packages. Items were fitted with a set of wire rope slings & Van Beest safety shackles, in addition to turn-buckle adjustment in each pair of lower slings to facilitate longitudinal C.O.G. adjustment. [...]

24 01, 2017

Bespoke lifting beam – SWL 3t

2017-02-02T15:04:53+00:00January 24th, 2017|Lifting Beams & Frames|

Bespoke fabricated lifting beam - SWL  3t Item has a central upper lifting point with shackle & master link & incrementally adjustable lower lifting points (2800/2000/1000mm ctr's) with integral handle, each fitted with an endless grommet type wire rope sling. Incorporates 2off fork lifting points to the top for transportation of the unloaded beam.

30 09, 2016

Spreader type lifting frame – SWL 27t/16t

2016-12-07T00:04:31+00:00September 30th, 2016|Lifting Beams & Frames|

Pictured following finish painting at http://www.bawcoatings.com Sheffield, prior to despatch to client. Fabricated spreader type lifting frame. 4off, lower 'outer' lifting points @ 7366 x 2692mm ctr's , rated @ 27t SWL 4off, lower 'inner' lifting points @ 4318 x 2567mm ctr's, rated @ 16t SWL Corresponding upper lifting points. Manufactured on behalf of a UK based packaged pump [...]

25 09, 2016

Cantilevered lifting beam – SWL 1000kg

2016-12-07T00:04:32+00:00September 25th, 2016|Lifting Beams & Frames|

Bespoke, cantilevered lifting beam– SWL 1000kg Designed & manufactured for use during refurbishment/modification works by a major building contractor to facilitate removal of glass building panels. Item utilises clamped connections to the existing structural building steelwork, protruding thro' a minimal opening, allowing finite adjustment to centralise the lifting beam at the required point of lift.

23 09, 2016

Bespoke lifting beam – SWL 2t

2016-12-07T00:04:32+00:00September 23rd, 2016|Lifting Beams & Frames|

Bespoke fabricated lifting beam - SWL 2t Designed & manufactured in-house for a UK based pump manufacturer/supplier to the Oil/Gas industry, to facilitate lifting of bespoke pump/mixer units in both the vertical & horizontal orientation, during site installation. Item supplied fitted with upper double leg chain sling & 4off lower single leg chain slings, all [...]

23 09, 2016

Counterbalanced lifting beam/frame – SWL 500kg

2016-12-07T00:04:32+00:00September 23rd, 2016|Lifting Beams & Frames|

Bespoke, counterbalanced lifting beam/frame - SWL 500kg Designed & manufactured for use during refurbishment/modification works by a major building contractor to facilitate removal of glass building panels. Item was manufactured 'piece' small for ease of access to site via. service lift. Assembled on site, the unit is restrained laterally & partially vertically via. the existing building steelwork & utilises [...]

Load More Posts